PT124B-123/123T Series Melt Pressure Transducer(Flexible stem & High accuracy)can measure the pressure and temperature in one point. The model PT124B-123T is with thermocouple. This series adopts special construction and excellent alloy elastic membrane to reduce the thermal draft and improve the accuracy. Zero & full span can be adjustable, amplified signal can be connected with PLC, which is the international standard. It is suitable for pressure measuring and controlling in melt fluid medium, such as the plastic & polymer in the process equipments. Can replace Dynisco / Gefran /GP50 etc. international brand absolutely .

Application
Chemical fiber & spinning Equipment;
Plastic and rubber, polyester process equipment;
Other pressure measurement and Control;

Feature  
High-standard quality;
Stainless steel Seal;
Simple Installation;
Completely interchange similar import products;
Internal 80% calibration;
Excellent stability.

Pressurerange:	0….3.5MPa to 0….150MPa
Output:	2mV/V;3.33mV/V;0~5V; 0~10V; 4-20mA;
Input voltage:	10(6~12V)DC;24(12~36V)DC
Accuracy:	±0.25FSO; ±0.5%FS (including linearity , Repeatability & Hysteresis )
Repeatability:	±0.2% FSO
Construction:	Wheatstonebridge
Bridge resistance:	Input: 345 Ohms Minimum; Output: 350 Ohms±10%
Overload pressure:	1.5×FSO
Internal shunt calibration:	80%±1%
Insulation Resistance:	200Megohms @100Vdc
Standardwetted Parts	Diaphragmcoated 15-5PH SST
Mounting Torque	500inch/lbs , maximum
Max.Diaphragm Temp:	0~400℃
Electronic operating temperature:	-25℃ -85℃
Electricconnector:	6PIN
Thermocoupletype:	J,K,E,PT100Optional(PT124B-123T)
Process connector:	1/2″-20UNF, M14×1.5,M18×1.5(Customerdesign)

Ordering Guide  

Model	Range(bar)	Output	ScrewThread	Electric connection	Otherrequirement
PT124B-123/123T	---	---	---	---	---
Example:PT124B-123-500Bar-4/20mA-1/2-20UNF-6PIN